Solwise NET-PL-200AV-PEW-N 200Mbps Home Plug Adaptor with wireless

Solwise PL-200AV-PEW-N. 200Mbps Home Plug Adaptor with wireless

The Solwise PL-200AV-PEW-N is a Homeplug Wireless N Extender, using the new Intellon 200Mbps AV solution that transforms your in-house power circuit into a networking infrastructure and a WLAN connection. It's ideal for anyone wishing to extend their wireless signal coverage for Internet access or to make a local area network(LAN).

Built-in Quality of Service (QOS) for homeplug also provides the necessary bandwidth for multimedia payloads including Broadband TV (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, Wireless LANs coverage, Audio-Video transmission across the network as well as Network camera connectivity.

Key Features:

• IEEE 802.11b/g/n Wireless specifications
  
• Data transfer rate up to 300Mbps via wireless
  
• Wireless on/off switch for power saving
  128-bit DES Encryption security support for powerline & WEP, WPA, WPA2 for wireless
  
• Apply for printer and peripheral sharing, HD Video Streaming, Voice over IP calls and Online games.

External Connectors:

• 2 x RJ45 for 10/100 Ethernet (AutoMDI/MDIX)
  
• 1 x Reset Button
  
• 1 x Push button for both WPS and SimpleConnect
  

1 Network cable included

*MAC Users

Although these Homeplugs will work fine with Macs, in order to change the wireless name and set up wireless security you will need access to a windows PC.

These units are sold as singles. Remember - you will require at least adapters two to create your network.

Solwise PL-200AV-PEW-N. 200Mbps Home Plug Adaptor with wireless

Technical Specifications

Standards 

• HomePlug® AV
• Wireless: IEEE 802.11b/g/n
• Ethernet: IEEE 802.3, Auto MDI/MDIX 

Protocols 

• CSMA/CA over Powerline
• Wireless: CSMA/CA,EDCA

Data Transfer Rate 

• 200Mbps over Powerline
• 300Mbps via Wireless

Modulation 

• Powerline: OFDM 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO
• Wireless: CCK,BPSK,DQPSK, QPSK, QAM

Security

• Powerline: 128-bit AES encryption (enabled with Simple Connect button)
• Wireless: WEP, WPA, WPA2

Indicator LEDs 

• 1 x Power
• 1 x PowerLine Link/ACT
• 1 x Ethernet Link/ACT
• 1 x Wireless Link/Act

External Interfaces 

• 1 x Electrical Power Plug
• 2 x RJ45 for 10/100 Ethernet (AutoMDI/MDIX
• 1 x Reset Button
• 1 x Push button for both WPS and SimpleConnect

Dimensions 

• 105(H) X 58(W) X 42(D)mm
• Weight 180g

Power Consumption 

• 6.8W, 0.12A

Temperature 

• (-)25° to 70° C 0° to 40° C

Environment 

• 30% to 80% Humidity (Non-Condensing

Others 

• Powerline: Intellon INT6400 HomePlug AV Chipset
• Wireless: Ralink RT3052 Wireless N Chipset
• Power Supply: AC 100 ~240V, 50~60Hz